unisonic technologies co., ltd ug9k dual transistor www.unisonic.com.tw 1 of 3 copyright ? 2012 unisonic technologies co., ltd qw-r218-008.b compound transistors ug9k ? description as a compound transistor with resistor, the utc ug9k is for switching application. ? features * silicon epitaxial type * the internal tow transistor elements are independent. ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 4 5 6 UG9KL-AL6-R ug9kg-al6-r sot-363 e1 b1 c2 e2 b2 c1 tape reel (1) r: tape reel (2) al6: sot-363 (3) g: halogen free, l: lead free UG9KL-AL6-R (1)packing type (2)package type (3)lead free ? marking
ug9k dual transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r218-008.b ? absolute maximum ratings (t a =25 ) parameter symbol ratings unit collector-base voltage v cbo 50 v collector-emitter voltage v ceo 50 v emitter-base voltage v ebo 10 v collector current i c 100 ma collector power dissipation p c 150 mw junction temperature t j +150 storage temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied. ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =100a 50 v input voltage v in ( on ) v ce =0.2v, i c =5ma 1.5 3.0 v v in ( off ) v ce =5v, i c =100a 0.8 1.1 collector-emitter satu ration voltage v ce ( sat ) i c /i b =10ma/0.5ma 0.1 0.3 v collector cutoff current i cbo v cb =50v 0.1 a dc current transfer ratio h fe v ce =5v, i c =10ma 50 transition frequency f t v ce =6, i e =-10ma, 200 mhz input resistance r 1 7 10 13 k ? resistor ratio r 2 /r 1 0.9 1 0.1
ug9k dual transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r218-008.b ? typical characteristics collector current vs. input off voltage input off voltage,v i(off) (v) 0.0 10 100 1000 0.4 0.8 1.2 1.6 2.0 v ce =5v utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
